|
|
3Com NBX 32MB SIMM Upgrade CT8M32E2M6
|
3Com NBX 100 0 Processor 32M Memory
Code: CT8M32E2M6
Call for Price - 650-733-4466
|
| |
The CT8M32E2M6 memory requirement
for the NBX 100 prior to V2.6.8 was only 32 MB RAM,
however you will need 64MB of RAM for software versions
V2.6.8 or above.
The NBX 100 systems that shipped with software below V2.6.8 only came with
32MB of RAM and will need the CT8M32E2M6 memory upgrade to support
software V2.6.8 or higher. NBX
100 systems that shipped with V2.6.8 or higher, already have the 64MB of RAM
There are a couple of ways to tell how much memory you have installed -
easy (but least accurate) is to look in Netset under System Settings you
will see Free Memory - if this is less the 15,000,000 than you most likely
have only 32 MB RAM. You can also tell by watching the bootup process
through the Console (CLI). Finally you can pull the top off (2 screws) and
look at the NCP which is always the top module - if there is one SIMM than
it is 32 MB, if there are 2 SIMMs than it is 64 MB..
- Manages all incoming and outgoing call
traffic
- 90 Day Warranty
- Thank you for viewing the CT8M32E2M6 3Com NBX 32MB SIMM Upgrade page -
|
| |
